Friday, December 18, 2015

HOW TO FLASH FIRMWARE ON DZ09 MTK6260 SMARTWATCH


DZ09

Intro

Specification:


DISCLAIMER
FLASH WITH YOUR OWN RISK!!!
I WILL NOT BE RESPONSIBLE FOR ANY NON FUNCTIONAL AND DAMAGES TO YOUR DEVICE HARDWARE AND SOFTWARE

Preparation:

What you need before start 


  1. PC or laptop (windows)
  2. USB cable
  3. Driver
  4. Flashtool
  5. Firmware (rom)
  6. Serial Number Writer Tool (for those who are lost imei number)

Getting started

1. On phone dialer press *#8375#
2. Write down all version summary info and keep it save for future reference
3. Write down your imei number by pressing *#06# and keep it save for imei recovery

Installing Driver

1.On your computer install com port driver for your DZ09 (come with flash tool download above)


2. Open your computer device manager
3. Turn off your DZ09 before connect to the PC via USB cable
4. Connect USB cable
5. Wait till computer installing new com port
6. If it fail to install due to device auto disconnect, disconnect USB cable from device. Run Flashtool.exe

 7. Press Download Agent button, and load file MTK_AllInOne_DA.bin


8. Go to Memory Test tab and check RAM test only. Press start
9. Connect USB cable to device and wait till the pc installing the port automatically.
10. After success installing driver Flashtool will test your ram. Wait till circle green popup. Then disconnect your device. This method is used for holding the port while windows working for driver installation.

Now the driver is already for flashing process.


Firmware Preparation

For firmware i just only need English language. Other language maybe not available. On listed below main language for those firmware was English and Chinese. Otherwise I did`t check yet. And all I already test with my own DZ09. There are many type and version on this model, I tested all and below are the suitable for my DZ09 hardware

DZ09 Firmware
APLUS firmware (only secret code did`t work)
GT08 firmware (only camera issue)

MORE - More version
DZ09

APLUS

GT08
After download the firmware, extract the .rar file

Firmware installation

1. Power off your DZ09
2. Open Flashtool.exe
3. On Download tab, hit Download Agent and open  MTK_AllInOne_DA.bin
4. Hit Scatter/Config File and load .cfg file inside firmware folder
5. Select Options, make sure you tick "backup->Download/Format->Restore" on Backup and Restore tab

6. Hit download button

7. Connect USB cable to your device

8. Wait for backup, install and restore process done till GREEN CIRCLE appear. It will take up to 5min to complete all the process. PLEASE DO NOT DISCONNECT THE USB CABLE DURING THE PROCESS TILL IT DONE. IF NOT IT WILL HARD BRICK YOUR DEVICE!!!!

9. Disconnect your USB cable
10. Done, start your smart watch as usual and enjoy

RECOVERING YOUR LOST IMEI

If "no network" state happen to your device even your sim card inserted with a good network coverage area, that mean you may have lost IMEI number. Press *#06# to check. If did`t show your IMEI you need to restore your IMEI by using Serial Number Writer Tool.


How to recover:

  1. Download serial number writer tool here.Then extract the file.
  2. Run SN Writer.exe
  3. Change target type to FEATURE PHONE
  4. Hit System Config
  5. Tick IMEI checkbox and hit MD1_DB
  6. Select BPL file. BPL file is located in your same firmware folder
  7. Open BPL file then hit save
  8. Turn off your device.
  9. Hit Start button and key in your IMEI number that you have write down before or you can find it under the battery cover. Press OK
  10. Wait till the status below the progress bar in "Wait for USB insert" state
  11. Connect USB cable to your device
  12. Wait the process done till GREEN PASS
  13. DONE, hit Cancel then quit the tool.
  14. Turn on your DZ09 device then check with *#06# code on your phone dailer.

APPS for notification push

You can download here for APK file. Download and install, before install make sure you already checked Unknown sources checkbox in the security setting of your phone. OR scan QR code below with your phone for direct link download to your phone

EXTRA : How to change clock face



  1. Make a copy of your rom folder
  2. Run mtk resource edit . Download here 
  3. Click open then browse your copied rom folder
  4. On file type change MTK BIN to ALL FILES
  5. Select Rom then open
  6. Select Picture TAB then identify your clock face file inside the rom
  7. Click WorkDir then find your clock face folder
  8. Select clock face file (rom) then select clock face .gif file (clockface folder)
  9. Click Import
  10. Save your rom by overwrite the copied rom
  11. Flash your new modified rom to your device by using above procedure.
Sample of the clock face here
Note: Clock face replacement will not change the clock hand. Only background of the clock. Clock face must be in .gif format and the file size is not larger then the clock face of the rom




451 comments:

  1. when i click start on checking ram it says failed to enumerate a certain com port. What could i be doing wrong?

    ReplyDelete
    Replies
    1. At options menu did you check "USB Download/readback"? Make sure your device is totally power off. If need remove the battery then put your battery back then put USB cable after you click start

      Delete
    2. help me with teamviewer, pls

      Delete
    3. Same problem.. how do i fix it? Already tried what you said.

      Delete
    4. i have the same problem, is this because i run windows 10?

      Delete
  2. hey my friend. thank you for posted this tutorial. i did it. it's worked! but can you help me. i have try to flash 3 driffirent firmware but my camera app keep saying camera error. anyway to fix that? please help

    ReplyDelete
    Replies
    1. Which firmware is camera error?if gt08 its same to me...but all firmware for gt08 when you install to dz09 it will get alot of error..but this gt08 firmware got only have camera error. Other function was ok

      Delete
    2. Hey, I'm running windows 7, I followed all the steps until I get to the part in memory test, I select ram test, then I start it, then I connect the watch, it installs the driver but never loads up the green bar? What could I be doing wrong?

      Delete
    3. Is that your windows successfully installed the port? If you get stuck on memory test hit stop then remove your battery, put back your battery then skip memory test if your windows has successfully install the port and go through to the flashing process. Memory test is only use to install the port if you got a problem to install the driver. And for further flashing u no need to repeat the driver installation just jump to flashing process

      Delete
  3. i did it. it's worked fine for me. but can you help me. my camera keep saying "camera error". is there any way to fix it??

    ReplyDelete
    Replies
    1. Which firmware is camera error?if gt08 its same to me...but all firmware for gt08 when you install to dz09 it will get alot of error..but this gt08 firmware got only have camera error. Other function was ok

      Delete
    2. Which firmware is camera error?if gt08 its same to me...but all firmware for gt08 when you install to dz09 it will get alot of error..but this gt08 firmware got only have camera error. Other function was ok

      Delete
    3. i'm using the dz09. i got the device but my watch had ugly watchfaces, so i looked for firmware update and i found your blog. i install the dz09 firmware last night but it's had camera error. so i tried to install aplus firmware but it's the same. still get camera error. then i install gt08. same thing happened. all three firmware had the same problem. camera error. can you help me. i can get it work. by the way.. sorry for my bad english

      Delete
    4. and by the way. i saw videos that they got the dz09 but they had facebook, whatapp and twitter on it. can you find that firmware. if it possible i will be very grateful. thank you for opened this blog

      Delete
    5. I have tested many firmware for DZ09, Unfortunately there are no other watch faces except those 3 ugly faces..i don`t know why they keep that watch faces. I`am trying find it too..but not found it.
      For facebook tweeter and whatsapp version i have one...you can go to this link and give it try http://adf.ly/11625153/dz09twf...i`am sorry for the camera maybe dz09 have many hardware version.on my hand i got more then 10 firmware for dz09...did you write down your firmware version before you flashing your watches? if yes please give me the detail...i will try to find out.

      Delete
    6. This link, directs me to a mega download, is this the right link for facebook, twitter and whatapp?

      Delete
    7. Yes, I uploaded to mega for you to download it

      Delete
    8. So how do I install the faceBook and WhatsApp?

      Delete
    9. Do I need to install the firmware to download the Facebook and WhatsApp?

      Delete
  4. http://4pda.ru/forum/index.php?showtopic=670733&st=1140 watch faces and tool to make changes. its hard to login.. once i was success and downloaded some watchfaces and tool. Never tried but if u make a firmware with new faces i will install.

    ReplyDelete
  5. http://4pda.ru/forum/index.php?showtopic=670733&st=1140 watch faces and tools. never tried but i downloaded some goodies (watchfaces [.gif] and tool to change) send me msg (email) and i will zip it to you.

    ReplyDelete
  6. nvm i zipped it https://drive.google.com/open?id=0B8ZhUoz7m_BiMVVJQTYtcm03VmM

    ReplyDelete
  7. holy sh*t. thank you so much. i don't know what to say. you are the best blogger i've ever met. thanks so much. i wrote down my version details but i was lazy and just wrote down a few details. here: version
    L99_HW_V1.3_V12
    BRANCH
    11BW1308MP L99
    BUILD: BUILD_NO SERIAL#:
    111601MT0123456789
    01260344_142623

    ReplyDelete
  8. hey. myfriend. last night i was trying to flash back the aplus firmware then at the end of the process it's said can't restore. now my device won't turn on. i have tried to reflash firmware but my laptop said can not reconize usb. i think my watch bricked. help please

    ReplyDelete
    Replies
    1. Try to remove your battery and putback before start flashing process as usual

      Delete
    2. did you have resolve? i have the same problem

      Delete
    3. did you have resolve? i have the same problem...

      Delete
  9. Is it possible to add to the clock Greek language? Or at least give me instructions where to find such a file and how to add it on the rom. If not, do you know if the clock supports unicode characters?

    ReplyDelete
  10. quisiera cambiar los temas del reloj alguna forma para agregar estos filesystem:https://mega.nz/temporary/mega/tNkCEYCb

    ReplyDelete
  11. Hi, awesome tutorial. I would like to know if you have any idea on how to change the ringtones and message tones with custom ones. Or is it I am stuck whith whatever ringtone or message tone is available on the watch?

    ReplyDelete
  12. Hi, great work by the way. Is there any way to change the ringtones or message tones to custom ones?

    ReplyDelete
    Replies
    1. For ringtone you can change it on profile>(select current profile)>option>customize>ringtone>select from file. File must be in .mp3 format.
      for message no option to use custom.

      Delete
  13. yes i downloaded that tool, but no wherte on the internet can i figure out how to use it. How do i use it? I have watch faces..

    ReplyDelete
    Replies
    1. Hi, sorry for my late reply
      I already test to used MTK resource edit tool to replace clock face, unfortunately its only can change the clock face, the clock hand still using the same (previous clock).I'am working to explore how to change both clock face and the hand

      Delete
  14. Hi. I have the MTK resource edit tool but no where on the internet can i find how to use it. does ayone know how to add the watch faces that i have and install it on the watch?

    ReplyDelete
    Replies
    1. Hi, sorry for my late reply
      I already test to used MTK resource edit tool to replace clock face, unfortunately its only can change the clock face, the clock hand still using the same (previous clock).I'am working to explore how to change both clock face and the hand

      Delete
  15. Hi, well I can not install the drivers, always gets me "failed to enumerated a certain COM port!" what do I do wrong?

    ReplyDelete
    Replies
    1. Try to uninstall driver 1st then reinstall the driver...

      Delete
  16. currently running the aplus firmware and it seems the bluetooth on the device drops the connection randomly, meaning i have to disable then re-enable bluetooth and then re-establish the connection.

    ReplyDelete
    Replies
    1. Sorry for that...Because DZ09 has many version of hardware its maybe not all compatible with this firmware. Its worked fine for mine DZ09.

      Delete
    2. I get a screen that says "flash tool error, flash tool environment preparation failed, it may be caused from dram instialization failed. Please check the emi information of the maui load is correct and fit the target. What does this mean?

      Delete
  17. hello, it's funny, if I connect the dz09 on, I select COM in the device and the PC recognizes as "MTK COM", I turn off the device, connect, and was recognized as "Alcatel single RNDIS interface # 2" ...

    I use windows 7 macbook pro with bootcamp

    ReplyDelete
    Replies
    1. On your history to your macbook did you already make connection to Alcatel device..try to uninstall driver 1st using device manager

      Delete
  18. hey friend. do you have any firmware of aplus but the camera worked? i love the aplus watch faces. but the aplus firmware got the problems with camera. keep saying camera error.

    ReplyDelete
    Replies
    1. Sorry for APLUS firmware maybe not compatible with your hardware camera version...i try to find out which Aplus firmware is compatible with your hardware

      Delete
    2. Hello,
      I replaced the current firmware with the one indicated above, and I lost the camera.
      thank you help me please
      here is my email: taiebelisa@gmail.com
      thank you very much

      Delete
  19. Hello, I tried another computer, and in this if it detects the com port me, I give a start and begins to count, but remains at 0% (waiting)

    Regards

    ReplyDelete
    Replies
    1. try to add manually by using "add legacy hardware" at device manager

      Delete
    2. My watch shows unspecified on devices,is that the reason it won't flash?, how can I fix

      Delete
    3. Try to remove and put back your battery

      Delete
  20. Please help. Having a hard time updating the firmware for my DZ09. I get stuck on the memory test. I don't understand how to hold the port, I am using win8.1 Can someone please help me?

    ReplyDelete
  21. Does the flash tool and usb com port work in Win8.1? I don't understand how to get the com port usb to work. Can you please help? I am trying to update the firmware on my DZ09.

    ReplyDelete
  22. Driver win8.1 for MTK maybe you can use this method
    How to Install USB VCOM Drivers in Windows 8 and up :-

    Step 1 :- Firstly we have disable digital driver signature verification by going into the advanced startup options for that First, press win + I to launch the charm bar, and click Change PC Settings at the bottom. Then, go to General, and scroll to the bottom of the page, click Restart Now button under Advanced Startup section.

    Note :- In Windows 8.1 and Up, the Advanced Startup option has moved to Update and recovery section under Recovery.

    Step 2 :- The computer reboots to a startup menu, in which click Troubleshoot and click Advanced Options at next screen, Choose Startup Settings next, and click Restart button. The computer reboots and prompts another menu to choose. One of the items is to Disable driver signature enforcement. Press number 7 or F7 to continue booting to Windows 8 with digital sign enforcement disabled.

    Step 3 :- Now you have disabled Driver Signature Verification for the current boot, now you can Install any driver including VCOM Drivers

    ReplyDelete
  23. This comment has been removed by the author.

    ReplyDelete

  24. Hello there. dz09 but there are no Turkish language.
    - I install the drivers .
    - I run Flash Tool 5.1308.00 1 Flash_tool.exe in the folder.
    - Download Agent click on the button " mtk_allınone_da.b ," I choose the way .
    - Scatter / Config click on the button " gplus60a_6464_11b_bb.cfg " I chose the road.
    - From the Options menu, select " Backup and Restore ( Backup- > Download / Format -> Restore )" I option.
    - I hit the download button and hooked hour while connecting cables as COM Port .

    Yesterday was giving error . I expect no changes are now minutes .

    0 % at the bottom (Enter Meta to Backup Calibration Date ...) Although the same 12 minutes

    ReplyDelete
    Replies
    1. On backup option try to select none...but your emei number will deleted...before you flash write down all information that i mantion above include imei number...to rewrite imei follow the instructions

      Delete
  25. HI, I keep getting failed to enumerate a certain port and I've tried to power off and take the battery out is happening on three different computers! Please help

    ReplyDelete
  26. Hello, Having trouble with my ports can't seem to connect the smart watch. Keep getting failure to enumerate com port and failed to open or set up com port, any help would be greatly appreciated.

    ReplyDelete
    Replies
    1. Try to power on DZ09 then enter code *#3646633#. Then go to device > set UART > UART setting. The setting should be
      TST-PS config : None 115200
      PS config : UART1 115200
      TST-L1 config : None 115200

      Delete
  27. I just try to flash is and it didnt let me
    What can be the problem?

    nx9_rb9a_64_t1_l3_c4_g4_2.1_v2_a_2
    0151204
    {branch}
    11cw1352mp
    gplus61a_11c_nx9
    build:build_no
    serial#
    build time
    2015/12/04 10:04
    {mre version} 3100
    hal_verno:

    ReplyDelete
    Replies
    1. Is`t DZ09? then what mean it did't let you flash?

      Delete
  28. Please email me jaime@printfeens.com

    ReplyDelete
  29. is there any ways that we cud add others theme for the smartwatch. i really like the aplus theme. but dont really want to flash the firmwares. is it possible?

    ReplyDelete
    Replies
    1. The answer is no..dz09 rom is not like android rom that can install or uninstall any theme or apps..the rom has been compile together with apps and theme..if you want add apps like facebook you must format whole device with other rom that come with facebook apps

      Delete
    2. thanks for the kind reply man, would u tell me where can i download others firmwares? any links or website that i cud visit? because i think the aplus firmware that u give are not compatible with my device. another thing is, i cant hold my com port when my device is turn of. i need to turn on the device then plug in the usb, and choose comp port manually so the flash tool cud recognise my watch. any solution for that man? again i wud like to say thank u so much for a great tutorial.

      Delete
    3. and it is important for me too add, that my watch only recognise the *#06# when i entered in the dialer. others code seems not to work. therefore i cant seem to know other details of my phone.

      Delete
    4. What rom that you need? i will try to find out and give the link if i found it. Can you flash DZ09 firmware backward?

      Delete
    5. RECEIVE THIS ERROR

      flashtool error: S_BROM_DOWNLOAD_EPP_FAIL (2036)
      [EPP] FlashTool environment preparation failed
      It May be caused from DRAM initialization failed

      Pleace check the EMI information of the MAUI load is correct and fit the target.

      MY WATCH SPEC:
      kct_x9_gv08_s1_LANGA

      BRANCH
      X9x9_gv08_s1_LANGA

      AND BTW, i need aplus firmware. i already download this version:
      APLUS_B_7789V_0309_V1.0_2015_04_10

      thank you for ur kind help. :)

      Delete
    6. Did your device is GV08? it seem like your target (device) is not compatible with the rom. On startup device what flash screen appear on your device? Fantime or hashkey or something else?

      Delete
    7. no my device is dz09 ( well thats what the seller told me on their website and gosh i really wish i cud post some photo here.)

      if u r referring the animation on when my watch start up, the user interface and background are totally similar to the dz09 splash screen u put on the description of ur post and youtube.

      and another thing is i have tried using windows xp for the flashing, yet i still cant hold the comp port. when i plug the watch it wud switch into removable drive not com port. i tried un/reinstalling the driver but seems unsuccessful.

      i juz want to have the aplus theme, GV08 also have the same interface, so is there any way posibble i cud find the suitable rom for my phone which have the same interface?

      anyway, im really sorry for asking so many question. and i must say, if u r nearby i really wish i cud buy u a cup of coffee or two :). thank you so much for ur help niezarm.


      Delete
    8. Do not turn on your device to flashing...Power off 1st before connect to the USB

      Delete
    9. I have got the same error on and one. Can get ride of it.
      lashtool error: S_BROM_DOWNLOAD_EPP_FAIL (2036)
      [EPP] FlashTool environment preparation failed
      It May be caused from DRAM initialization failed

      Pleace check the EMI information of the MAUI load is correct and fit the target.
      I am desperate.
      My phone is gv08s, has the same spec. like the dz09

      Delete
  30. happy new year, I've finally been able to change the rom!, but now I can not change watch faces, I use mtk_resource but when "import" leaves me "choose one taget item fist"!
    I do not do that bad.

    ReplyDelete
    Replies
    1. If you want i make some tutorial for you (video)...but for further information i let you know that changing clock face only the clock face change but the clock hand are same as previous clock..

      Delete
    2. I already make little video.. https://youtu.be/6MYPVhas0Ok
      And also i have update this blog see above

      Delete
  31. thanks for watch faces tutorial. so help full do you have any other watch faces?? i looked on the internet but i can't find any other watch faces

    ReplyDelete
  32. Sorry, I did`t working for clock face. It`s more on graphic editing. I just can only show how to apply the watch face onto your rom..sorry for that

    ReplyDelete
  33. For your information, method of flashing MTK device is same. Only the rom version must compatible with the hardware.

    ReplyDelete
  34. Viber notifications!!! Is it possible or not?
    Thank you!

    ReplyDelete
    Replies
    1. all notification from your phone will push to your device. Its depend on your setting which app did you wanted to push to your device. Just tick which app and it will push.

      Delete
    2. @Niezarm San,thank you,but it is not work with btnotification.I start the program,setting,check all apps,but...... no viber notices. :(

      Delete
  35. I have problem with driver MS_USB_COMPORT. i can't install driver. help me

    ReplyDelete
  36. Wowwwwww,it work :).Now I install correct version of btnotification!
    Thank bro!!!

    ReplyDelete
  37. Guys... i installed GT08 firmware and my camera is wokring also every app on this firmware, and i use fundo wear for app in my smartphone, also i tried the other fundo applications, they work fine for me

    ReplyDelete
  38. HY,
    I have a GV08S watch , and want to install the firmware off DZ09 on it.
    Is this possible?
    This is my info:
    Version:
    L99_HW_V1.3_V04
    BRANCH:
    11BW1308MP L99
    MRE VERSION 3100
    MOTION SENSOR:BM
    A250_I2C

    THANKS

    ReplyDelete
    Replies
    1. Sorry i didn't Test yet for GV08...

      Delete
    2. Ok, my problem is that the bluetooth is weak with the connection. Thats why a want to test another rom.
      Is there a possible way the make the bluetooth better without flashing a rom?
      Thanks

      Delete
    3. How far the bluetooth lost connection in open area?

      Delete
    4. Lets say about 5 meters, and when i put my hand on my phone and cover , the connection is lost.

      Delete
    5. Its is not the firmware problem, on your watch strap (bulky area) has GSM antenna and bluetooth antenna. The bluetooth antenna is a single wire that connected to tahe main board, the GSM antenna with the flat antenna. Maybe the wire has been broken due to the wire has snap by cover else...open and check with your own risk

      Delete
  39. I'm performing all steps one by one and when I want to perform memory test I open flashtool, switch tab to 'memory test', check 'RAM test' and press START button. Then I'm connecting the watch and memory test starts to count elapsed time so I thing it is working. But after about 30 seconds my PC disconnects the watch and instead of seeing it as connected to COM port it starts to be visible as the standard mass storage connected to USB and I'm getting error from flashtool saying the communication has failed. The same happening during flashing attempt.

    Does anyone else experienced this?

    When the watch is switched on and I connect it to the PC I can choose in which mode it should be connected, but I cannot do this while it is powered off.

    ReplyDelete
    Replies
    1. Power on then check the UART settings...i already put some comment above about UART settings

      Delete
  40. Hi all! Does anyone have the MTK6260A version of this smartwatch? Can any one help me with the original firmware? of any backup ones? Ive try to load the MTK6260 without the "A" my watch does boots up but my touchscreen is NOT working.

    ReplyDelete
  41. check my video, if any one can help me, would be great!

    https://youtu.be/Rr5dZOSkhqs

    ReplyDelete
    Replies
    1. Mybe your touch screen version is another oriented positions or you got other version of touchscreen panel.can you flash dz09 firmware then get a test?

      Delete
    2. I've stay all night up searching for different firmwares with no luck man, I didn't make a backup of the original firmware (sad thing is,i only got the watch for 2 days) can you mail me your backup firmware of the watch? dfrancees@gmail.com THANK YOU!

      Delete
    3. Can you mail me the backup firmware of the watch please? dfrancees@gmail.com

      Delete
    4. P.S. already did flash your original DZ09 firmware..

      Delete
    5. Iam sorry to hear that, for me its working fine. So my version maybe not compatible with yours device. I`am working to make the download list of firmware and i will provide soon. You will able to download and give a try. And not all will compatible because its too much version

      Delete
  42. Hi, i recently bought the aplus gv18, and there is an app for Facebook/whatsapp, but it links to the browser, is this normal? Or how do i install it correctly?

    ReplyDelete
  43. i'm already finish flashing my DZ09 but after it, when i'm open the menu it's always shows blank screen and entering standby mode. could anyone helping me ?

    ReplyDelete
    Replies
    1. Try to flash another rom. Otherwise you can try to download other version that i have already give a link in comment

      Delete
    2. could you give me the link for other version of the ROM due to i cannot find the link you are shared..

      Delete
    3. Go herehttp://adf.ly/11625153/dz09twf

      Delete
    4. Thanks brother, it's working normal now. but actually i like the Aplus Themes, is there any tutorial to use the theme on the facebookwhatsapptwitter rom ?

      Delete
    5. Actually it is not a theme...but it is a rom that include driver for those hardware such as camera, GSM module, touch panel....if you cant use it seem like your hardware not compatible with the rom. And for more info that Chinese device is not using same hardware for the same model. There are many version, depend on manufacturing lot

      Delete
  44. I've read trough the comments, can you mail me all the 10 different firmware links for me? maybe one of them is the correct one for me to make the touchscreen work my e-mail is dfrancees@gmail.com THANK YOU!

    ReplyDelete
    Replies
    1. Iam preparing the rom to uploaded...i will provide the link soon..because iam a working man so it's take a time...

      Delete
    2. its oki can understand it. THANK YOU for your efforts

      Delete
    3. Mine is from PADGENE maybe they got different hardware?

      Delete
  45. how is the uploading progress going?

    ReplyDelete
    Replies
    1. Sorry under progress to compress the file

      Delete
    2. if I may know, do you own the "PADGENE" version of this watch?

      Delete
    3. I have uploading several firmware. But it still uploading. You the download are available now on "MORE" at firmware list above. But don`t ask me which one is compatible with yours. Because the version its only store in date code name. Sorry for that, but you can give a try

      Delete
    4. I have uploading several firmware. But it still uploading. You the download are available now on "MORE" at firmware list above. But don`t ask me which one is compatible with yours. Because the version its only store in date code name. Sorry for that, but you can give a try

      Delete
  46. help me https://www.youtube.com/watch?v=u-m7f5qOWRg&feature=youtu.be

    ReplyDelete
  47. HEY DUDE THIS TUTORIAL IS AWESOME BUT I HAVE PROBLEMS WHEN I CLICK DOWNLOAD AFTER CHOOSING THE SCARTTER FILE NOTHING HAPPENS.PLZ HELP

    ReplyDelete
  48. I have made some download page for other version of firmware. The page still under updating more file. But the download are available now. You can go here http://adf.ly/11625153/download-page or link "MORE" i already provide above on firmware list. And not all will compatible with your device but you can give a try....

    ReplyDelete
    Replies
    1. THANKK YOUUUU!!! would try them out. *crossing my fingers* hopefully one would make my watch work back.

      Delete
  49. any chance you can get the PADGENE version firmware from the DZ09?

    the link for this specific version ; http://padgene.com/Product/1249561316.html

    I got touchscreen driver problem

    ReplyDelete
    Replies
    1. I can`t give guarantee but you can give a try because your DZ09 has rebranded by PADGENE. On my hand a lot of firmware but i don`t know which one is. Need to flash 1st and know after that...sorry. And more firmware will uploaded soon...

      Delete
    2. Ok thanks man, will wait for more firmwares, my LAST resort would be to buy another one from PADGENE and do a backup and flash it back to my current one.

      Delete
    3. ok, I've go thru my photos that ive take from the watch for my review on my blog, the boot screen shows "Padgene" logo, hmmm maybe if you spot an DZ09 with that particular firmware, let me know ok?

      Delete
  50. HI!
    i have a DZ09 and i can not make the backup of flash!

    The device info:

    [VERSION]
    KCT_NX9_D_K09_B_32_T1_C5_L3_G10_20151012

    [BRANCH]
    11CW135MP
    NX9_D_K09_B

    BUILD:
    BUILD_NO SERIAL#:
    [BUILD TIME]
    2015/10/12

    [MRE VERSION]
    3100
    HAL_VERNO:

    I follow u'r indication and doesn't work. I can't make the com-port to stay stabile.
    i receive an error on back up and ram test: S_BROM_CMD_STARTCMD_FAIL (2005)
    [BROM] Can not pass bootrom start command! Possibly target powered up too early!

    What i'm dooing wrong?

    Thanks a lot!

    ReplyDelete
  51. darn still NO luck with the touchscreen, this is real SAD now

    ReplyDelete
  52. This comment has been removed by the author.

    ReplyDelete
  53. Is there anywhere that we can download more FW for the DZ09? and is there any tutorials on how to make your own? I would love to learn.

    ReplyDelete
  54. ok, I've go thru my photos that ive take of the watch for my review on my blog, the boot screen shows "Padgene" logo, hmmm maybe if you spot an DZ09 with that particular firmware, let me know ok?

    ReplyDelete
  55. Take a look at this video, the original boot up screen progress and you can also see the box from the brand ;

    https://youtu.be/9jkgYWvpKko

    ReplyDelete
  56. working install on the SmartWatch ZGPAX S29 ?

    ReplyDelete
  57. ayuda no vale el tactil de la pantalla

    ReplyDelete
  58. en que lugar se guardan las copias de seguridad ayudaaaaaa

    ReplyDelete
  59. Problem how to fix https://www.youtube.com/watch?v=aFVvPmu86CA

    ReplyDelete
  60. Hy, i have flash all firmware on my gv08s,
    but the screen is orientated, and the colors not right, but everything works.
    Sound, touchsceen, etc....
    This happen to all firmware, why?

    ReplyDelete
    Replies
    1. That mean the hardware is difference with others. Try to flash other roms

      Delete
  61. Hy,can i have a dz09 rom with whatapp apk...my model doesn't have..

    ReplyDelete
    Replies
    1. You cant install any apps on your DZ09. Its built-in on your rom. THe rom is not like Android that we can install or remove the program. Its like basic phone rom

      Delete
  62. Hello there! I am loving your work, keep it up! I do have some questions though. I tried the DZ09 FW you made with facebook, whatsapp and twitter on it and they wouldn't load giving errors, I have flashed the GT08 FW which has Facebook on it and it works on that FW without a problem. Is there any way to add the GT08 Facebook app to the DZ09 FW? Or how do you do it? as I am eager to learn! i'm big on coding and such so interested to know how you are doing all of this. :P

    ReplyDelete
    Replies
    1. The answer is no. The rom not like Android roms.

      Delete
  63. it doesnt work, the loading bar for the ram test stayed at 0%(waiting).

    HELP ME PLS!!!

    ReplyDelete
    Replies
    1. make sure you turn off your device. If your already installed the driver, just jump to the flash process.

      Delete
    2. https://www.youtube.com/watch?v=6MLphheyiIQ&feature=youtu.be i have new problem

      Delete
    3. Hello ! First of all happy new year !

      Then, to the problem :)
      When iI try to install comport driver, the install window appeares and disapears imidiately, without any furter actions. Could it be because of Win 10 I'm running ?
      But when I plug the watch (turned off), windows detects and installs the driver.

      Still, when I trsy to run Ram test or flash (watch still turned off with baterry removed and back in to be sure), the process remains at 0% "waiting". Is it because of the comport problem, or could it be something else ?

      Thanks a lot in advance, and great job BTW !

      Delete
    4. This comment has been removed by the author.

      Delete
  64. I cant do the imei thing. it keep failing and says Meta_BROM_ERROR

    ReplyDelete
  65. Hi,
    What is the latest DZ09 firmware with whatsapp/FB/Twitter WITH Dutch language?
    Thanks in advance!

    ReplyDelete
  66. https://youtu.be/Qq1CQ5H-4R4 flash error

    ReplyDelete
  67. I see that i have been added new FM in download section, is it possible to make new video and all of us see what are they ?

    ReplyDelete
    Replies
    1. would also like to know how we can use fm if there is no slot to plug headphones :S Is it just a tease option lol?

      Delete
  68. Hay, i just tried flash my DZ09 but i got this:

    FLASHTOOL ERROR : S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET ( 5095 )
    [MAUI/MOLY][SingleMemory] The flash ID of MAUI/MOLY bin is not match to target phone's flash! Please check MAUI/MOLY load is built correctly and fit this target.

    and this my watch version

    [VERSION]
    NX9_V2_1_YLW_SW014_64_T1_L2_C5_G10_A_20151217
    [BRANCH]:
    11CW1352MP
    GPLUS61A_11C_NX9
    BUILD: BUILD_NO
    SERIAL#:
    012801_214251

    10
    [BUILD TIME]
    2015/12/17 16:10
    [MRE VERSION] 3100
    HAL_VERNO:

    I already flash with last one of DZ09, GT08, GV08 and w02 but same at all, please help

    ReplyDelete
  69. error in boot meta communication
    plese help

    ReplyDelete
  70. This comment has been removed by the author.

    ReplyDelete
  71. okay so I just want to extract the rom or firmware from my watch to have it before I flash another firmware on there, but I am not seeing how to do this?? Because it seems that there are many versions of this watch DZ09 but all a little different. So I just want to make a backup of the exact firmware I have currently installed before I proceed.

    All my information is different from what i am seeing here is mine:
    LD99_JMX (SmartWatch)_LangABC_7789v(cpt)_0329_V3.5
    [Branch]:
    GPLUS60A_6464_11B
    BUILD: BUILD_NO
    SERIAL#:
    [BUILD TIME]
    2015/11/28 12:44
    [MRE VERSION] 3100
    HAL_VERNO:

    ReplyDelete
    Replies
    1. Like to make things more simple, is there another name for >>extracting firmware<< on this software, or am I suppose to use a different program?????? So lost

      Delete
  72. Hello ! First of all happy new year !

    Then, to the problem :)
    When iI try to install comport driver, the install window appeares and disapears imidiately, without any furter actions. Could it be because of Win 10 I'm running ?
    But when I plug the watch (turned off), windows detects and installs the driver.

    Still, when I trsy to run Ram test or flash (watch still turned off with battery removed and back in to be sure), the process remains at 0% "waiting". Is it because of the comport problem, or could it be something else ?

    Thanks a lot in advance, and great job BTW !

    ReplyDelete
    Replies
    1. If you have a solution, with pleasure ! :)

      Delete
    2. don't use USB in Box Dz09, i can use USB SamSung to flash don't error

      Delete
  73. Help me!!! you who have stored DBL file imei not pleased with me! I Uprom lost imei then: (( My clock is dz09

    ReplyDelete
    Replies
    1. bi gi minh giup cho fb:https://www.facebook.com/HoaKSe

      Delete
  74. please friend, you can send the firmwer to me by e-mail, i can't download it from your link...

    ReplyDelete
  75. Help me please when i flash the bar stays at zero is your DZ09 unbranded by the way cause mine is but i cant get it to flash it goes up to 32 seconds and the automatically disconnects i tried without the battery same problem i have been doing this since 3:05 and now its 7:04 please help me dude

    ReplyDelete
  76. This comment has been removed by the author.

    ReplyDelete
  77. Does anyone have a problem with the screen? When you power it on, touch works, but the first time you turn off the screen and turn it on, touch doesn't react.
    I have Aplus GV18. Tried all Roms posted, but problem exists on all of them.
    Please help.
    Thank you.

    ReplyDelete
  78. Hi. What is the firmware with facebook , whatsapp ?

    ReplyDelete
  79. hello, i want to change my rom but if i chechk memory test or flash is error 5095 and say cehck your MAUI load

    ReplyDelete
  80. hi, my dz09 firmware is:

    LD99_JMX (SmartWatch)_LangABC_7789v(cpt)_0329_V3.5

    I installed drivers. But dz09 become usb disk when it power off. How I choose com port mode device power off?

    ReplyDelete
  81. How can I backup my firmware? that is installed in my DZ09.

    ReplyDelete
  82. Salam bos..boleh tolong care nk install weixin atau wechat yg sedia ade dlm dz09 tu...dh brape kali cube tp asyik time out je..gprs ok,sbb dh try buke browser xde masalah..bukan weixin je ade masalah, QQ dan yg lain jugak xboleh nk install..sumenye kluar time out..salah pade setting grps saye ke bos??

    ReplyDelete
  83. Hello everyone, I have a DZ09 SmartWatch and I need some applications. I have alrady tried (jar, jad and apk types), but don't function. If you have any idea please help me. Thank you.

    ReplyDelete
  84. I got a Zgpax S29... Everytime I flash any of these firmware the screen is upside down and there is no touch response.. Does anyone know where I can get the original firmware or how to fix this situation. Please.. The watch is useless right now. Thanks.

    ReplyDelete
    Replies
    1. Have you a firmware? I have one original

      Delete
    2. Have you a Firmware? I Have a original. But no other works

      Delete
    3. Can you send me the firmware? Email it to me @ slutskee@gmail.com
      Or put it online for me. Id GREATLY appreciate it... VERY VERY MUCH. Im lost without it.. Thanks a ton...

      Delete
  85. hi, i sorry for here,thanks for your tutorial
    but i followed the flashing step , when the time counter until 33seconds,will pop up one of the error call ------ META ERROR: Error in BootROM communication
    i dont know how to solve it, and my devices is dz09,when i get it .the Devices missing some built in apps such as the internet browser ...how im to solve , and the internal storage just only have total 20kb ....18 kb left ...i not idea
    thanks and forgive me the broken english .Thanks alot

    ReplyDelete
  86. Hello, i have GT08 watch. All is ok , but when i make a bluetooth call my microphone don't work. I can hear everything they say , but they can't hear me . When i make a sim card call from the watch microphone works.
    Is that firmware eror or what?
    Can somebody healp me ?

    ReplyDelete
  87. Hey buddy, just wanna tell you that your link to the bluetooth notification app doesn`t work :)

    ReplyDelete
    Replies
    1. If didn`t work just scan QR code on your device using your phone and download the apps

      Delete
  88. How to install facebook, twitter, and whatsapp on this dz09??
    Answeeerr pleeaasee

    ReplyDelete
    Replies
    1. You cant install but only can flash firmware that come with facebook twitter and whatsapp

      Delete
  89. Hi this tutorial worked a treat, i loaded the dz09 firmware perfect, i then did it again with a custom watch face....now i want to try APLUS firmware, but the watch will only connect to my pc as a removable disc and not a com port...i have uninstalled drivers and reinstall i have removed the battery i belive i havce tried everything? Any body shed any ligth?

    regards

    wayne

    ReplyDelete
  90. This comment has been removed by the author.

    ReplyDelete
  91. I've installed the software but the touchscreen does not work. What do I do ?

    ReplyDelete
  92. The ROMs/Firmware looks fine, but like many others have said, I came across a Touch Screen Driver issue, and though I attempted to make a backup before I updated.. I've installed the software but the touchscreen does not work. What do I do ? I could not find the back up.. and now my screen though looks ok, the touch is all over the place.. I'm wondering if anyone has a functioning back up to share.. Please Email at afyden@yahoo.com

    ReplyDelete
  93. Have every one a Firmware for Zgpax s28/29 that woks???? Evwry Firmware here not works for zgpax. Thanks

    ReplyDelete
  94. PLEASSEEE LET ME GET THE ORIGINAL S29 FIRMWARE.... MY WATCH IS BROKE WITH NO TOUCH SCREEN WITHOUT IT. THANK YOU Master DK.

    ReplyDelete
  95. This comment has been removed by the author.

    ReplyDelete
  96. I keep getting stuck at the FLash_tool RAM test. It doesnt seem to recognize my watch. I am using Windows XP. I have tried turning it on and off, re-inserting the battery, etc. I also installed the MTK USB Driver. When selecting the RAM Test, do I leave the Data Bus test, Addr bus test, dedicated pattern test, and inc/dec test all selected as well?

    ReplyDelete
  97. i dont know why my smartwatch's clock face has no date ...can the date be added to the clock face? I saw a few on youtube channels of the same model with mine and they have date on the sides of the clock face.

    ReplyDelete
  98. How do i backup my current firmware on my dz09? i want to backup it first before i proceed in flashing, Please Help. Thanks

    ReplyDelete