2. Write down all version summary info and keep it save for future reference
3. Write down your imei number by pressing *#06# and keep it save for imei recovery
Installing Driver
1.On your computer install com port driver for your DZ09 (come with flash tool download above)
2. Open your computer device manager
3. Turn off your DZ09 before connect to the PC via USB cable
4. Connect USB cable
5. Wait till computer installing new com port
6. If it fail to install due to device auto disconnect, disconnect USB cable from device. Run Flashtool.exe
7. Press Download Agent button, and load file MTK_AllInOne_DA.bin
8. Go to Memory Test tab and check RAM test only. Press start
9. Connect USB cable to device and wait till the pc installing the port automatically.
10. After success installing driver Flashtool will test your ram. Wait till circle green popup. Then disconnect your device. This method is used for holding the port while windows working for driver installation.
Now the driver is already for flashing process.
Firmware Preparation
For firmware i just only need English language. Other language maybe not available. On listed below main language for those firmware was English and Chinese. Otherwise I did`t check yet. And all I already test with my own DZ09. There are many type and version on this model, I tested all and below are the suitable for my DZ09 hardware DZ09 Firmware APLUS firmware(only secret code did`t work) GT08 firmware(only camera issue)
After download the firmware, extract the .rar file
Firmware installation
1. Power off your DZ09
2. Open Flashtool.exe
3. On Download tab, hit Download Agent and open MTK_AllInOne_DA.bin
4. Hit Scatter/Config File and load .cfg file inside firmware folder
5. Select Options, make sure you tick "backup->Download/Format->Restore" on Backup and Restore tab
6. Hit download button
7. Connect USB cable to your device
8. Wait for backup, install and restore process done till GREEN CIRCLE appear. It will take up to 5min to complete all the process. PLEASE DO NOT DISCONNECT THE USB CABLE DURING THE PROCESS TILL IT DONE. IF NOT IT WILL HARD BRICK YOUR DEVICE!!!!
9. Disconnect your USB cable
10. Done, start your smart watch as usual and enjoy
RECOVERING YOUR LOST IMEI
If "no network" state happen to your device even your sim card inserted with a good network coverage area, that mean you may have lost IMEI number. Press *#06# to check. If did`t show your IMEI you need to restore your IMEI by using Serial Number Writer Tool.
How to recover:
Download serial number writer tool here.Then extract the file.
Run SN Writer.exe
Change target type to FEATURE PHONE
Hit System Config
Tick IMEI checkbox and hit MD1_DB
Select BPL file. BPL file is located in your same firmware folder
Open BPL file then hit save
Turn off your device.
Hit Start button and key in your IMEI number that you have write down before or you can find it under the battery cover. Press OK
Wait till the status below the progress bar in "Wait for USB insert" state
Connect USB cable to your device
Wait the process done till GREEN PASS
DONE, hit Cancel then quit the tool.
Turn on your DZ09 device then check with *#06# code on your phone dailer.
APPS for notification push
You can download here for APK file. Download and install, before install make sure you already checked Unknown sources checkbox in the security setting of your phone. OR scan QR code below with your phone for direct link download to your phone
Note: Clock face replacement will not change the clock hand. Only background of the clock. Clock face must be in .gif format and the file size is not larger then the clock face of the rom
